 |
New! Available August 2009 - DVS Technical Codes on Plastics Joining Technologies
2008 English Edition. Click here for table of contents. |
 |
|
The Bending and Edging Machine BM 05 is a semi-automated machine with a material thickness range of 3 to 25 mm. Whether small or large pieces are processed, the digital travel distance measurement and the synchronized belt transmission of the transport system make it a precision machine with great efficiency. The efficiency is greatly enhanced by simultaneous heating and bending when multiple bends are performed in one work piece. By separating the bending function from the heating/transport function, the physical bending of the first leg is performed while the second bend is being heated up. This continuing cycle dramatically decreases the overall process time. The optional vacuum clamping technology enables the production of very small bending geometries. Short set-up times, timer-controlled heating and cooling cycles and the automatic bending process from the opening of the heating system to the end of the cooling time ensure a quality oriented process.
 Technical Data
To view a comparion of technical data for sheet bending equipment products, please click here.
- Working Width (mm):
3.050 (other working widths on request)
- Material Width (mm): 3 to 25
- Min. Channel Cross Section (mm): 200 x 200
- Vacuum Clamping Device: optional
- Vacuum (U Profile up to 8 mm thickness):
40 x 80 x 160
- Bending Angle (°): 0 to 95
- Operating Pressure (bar): 8 to 10
- Supply Voltage (V): 230 / 400
- Capacity (kW): 6,5
- Dimensions (mm): 4300 x 2000 x 1500
- Weight (t): 2,0
|
