 |
New! Available August 2009 - DVS Technical Codes on Plastics Joining Technologies
2008 English Edition. Click here for table of contents. |
 |
|
 |
Phosphor Bronze Brush Electrodes
Used to test large flat areas that are not easily scratched
E104: 101mm (4") wide
E106: 152mm (5") wide
|
 |
E901: 250mm (10”) wide Gauze Mesh Electrode. Used for testing rubber sheets - rubbing the electrode with French chalk will mark the location of the fault |
 |
76mm (3”) long Pointed Probe
E910: For testing recesses or small areas |
 |
152mm (6") long Drum Brush Electrode
E912: Used for checking irregular shaped objects |
 |
152mm (6") long Flexible Probe
E920: Used for testing welds, overlaps and around corners |
 |
Straight Silicon Rubber Electrodes
Used to test large flat areas that are easily scratched
E206: 152mm (6") wide |
 |
A4: Adapter (required to attach E206,E901, E104 and E106 electrodes to tester) |
 |
A2: SGS Spark Gap Setter with lead and plug, used for setting the output voltage of the tester |
 |
Insulated Extension Rods
A7: 220mm (9”) long
A8: 330mm (13”) long
A11: 460mm (18”) long |
|
