Menue
Home
Home
Sheet Bending

BV x06

The compact - bending and edging device for sheet thicknesses from 2 up to 20 mm

Features:

  • V-shaped upper heating element with optimised flank angle to produce 90° bends in PE-HD and PP
  • Lower heating element in flat design to heat up the rear of the panel or board
  • Separate temperature control for the upper and lower heating element
  • Heating and bending times controlled by the Siemens PLC control system
  • Ejector bar with clamping disks to clamp the panels or boards
  • Infinitely variable adjustment of the angle via the machine contol from 5° to 95°
  • Mechanical bending line correction
  • Quick disconnect coupling for the easy removal of closed profiles
  • User interface with symbols / does not rely on user language
  • Paint: blue / silver / anthracite

Range of Application:

Manufacture of reservoirs, tanks and containers, manufacture of plastic apparatus, ventilation systems, water treatment systems, scrubbers, environmental technology, swimming pools, transport and logistics

Options

  • Contact heating element 20 x 40 mm, flat, to process PVC, PC-ABS, PMMA
  • Contact heated tool, v-shaped
    to produce bending angles ≠ 90° e.g. 45° or 60°
  • Stop position with scale To adjust the bending leg angle between 250 mm and 1,100 mm
  • Travel limit for upper heating element
    To heat the upper side of panels via radiant heat
    only in combination with contact heating element 20 x 40 mm, flat
  • Travel limit for lower heated tool
    To heat the lower side of panels via radiant heat
  • Carrying beam upper heating element BV series
  • special power requirement
  • custom paint, require RAL designation

Accessories:

Accessories >

Downloads:

Brochure BV

Video BV 305

Technical Data

BV 206 BV 306
Machine Length (mm) 3,400 4,400
Machine Width (mm)
- with stop position		 1,100
2,000		 1,100
2,000
Machine Height (mm) 1,700 1,700
Total Weight (kg) 1,150 1,500
Maximum Working Width (mm) 2,050 3,050
Sheet Thickness to be welded (mm) 2 to 20 2 to 20
Minimum channel cross-section
inside dimension (mm)		 250 x 250 250 x 250
Power Supply 230/400 V
3/N/PE, 50/60 HZ		 230/400 V
3/N/PE, 50/60 HZ
Power consumption (kVA) 4.5 6.5
Compressed Air Connection (bar) 8 - 10 8 - 10
Clamping Force at 10.0 bar (kN) 12 18
Minimum Bending Angle 5° 5°
Maximum Bending Angle 95° 95°
Upper Heating Element
(teflon coated Tmax = 260° C) 		30 x 40 mm, 86° 30 x 40 mm, 86°
Lower Heating Element
(teflon coated Tmax = 260° C)		 25 x 40 mm, flat 25 x 40 mm, flat
Overview Top of page

Do you have any questions concerning this product